1. Room
- Sorry, because of wood, not every room can use parquet house. Humidity can slowly damage the wood and cause odor.
- Parquet also not scratch resistant and sensitive to the impact, so that this type of floor suitable only in a small room on the floor impact activities such as sleeping rooms.

2. Treatment
- Before care, the first step should be done away from all sharp footwear and hard.
- Treatment parquet must be careful right in order to maintain the beauty and durability, because sometimes we forgot or did not intentionally do things – things like are on the marble floor.
- Use a vacuum cleaner, a broom made from feathers or other cleaning tools with a soft surface. It’s easy to avoid scratches parquet
- Because no bear an impact, be careful when moving items. In addition to the way appointed, should the transfer of goods using a cloth or rubber mat, or if necessary by means of wheeled transportation such as trolleys of goods.
- Do not mop the parquet floor. Try to avoid using water with a volume of many, even if it aims to clean up. Use a dry cloth is better than a wet mop that can make the water seeps into the wood pores.
- Too long wet – water gradually settle to the layers of plywood and wood will make obsolete. The more humid, the pressure on the parquet will change drastically, especially on parquet square. If the initial effect caused only crake or crackling sound, slowly but surely if you have bad joints that coming loose parquet instantly when burdened.
- The sun is “evil” to make the wood color fading. For that, frequently exchange where the furniture in the room using parquet.
- Do not take the risk if you do not have enough time to take care of parquet. Use the service providers to take care of parquet steam. Periodically, these treatments can be done for six months.
- To color remains shines parquet, parquet apply lemon oil at least once a month. Instead, do not use polish with a high chemical content, in addition to long-lasting scent to settle in the timber, it makes the age old wood faster.

3. Three Layer
Always remember, usually parquet consists of three layers, namely:
- Polyfoam or the bottom layer is in direct contact with the concrete floor. Polyfoam layer is useful as a silencer of the soil moisture so that the wood is more durable and able to reduce the absorption of the cold temperature of the soil.
- Plywood or layers of a working middle ground stability. This layer will manage the balance between contraction and expansion of the floor due to the high air temperature. Typically, this layer is made of wood made from soft.
- Wood parquet floor or the top layer is made of solid wood such as teak, merbau, oak or cherry.

You can also start collecting the decorative plates if you are interested. Start hunting for collectible decorative plates from the local stores or online. You can find a number of people selling interesting decorative plates online. Finddecorativeplates.com is one of the sites for you to find them. You can find a set of decorative plates or single collections. If you are looking for some decorative plates to decorate your house, consider the color and the pictures or motifs. They should be able to go along with the rest of the house. After you find the right decorative plates, arrange them in such a way that they are in good balance and composition.

Having a cleaning device that can sanitize at the same time is very beneficial. You can clean your bed and make it free from the dust mites, keeping you away from allergies and asthma or other respiratory diseases. You can also use Shark Steamer Cleaner to clean your carpets. You can remove the stains on the carpet and sanitize it at the same time, making it really fresh. This is better than using damp mop to clean the stains.

As in the picture, residents wanted a warm atmosphere in the main bedroom. So by the architect, wooden panels mounted on the wall. Not one piece of wood, but the teak pieces are arranged lengthwise, although only the pieces, colors and wood motif makes an intimate atmosphere in a room with a spacious 35 m² up perfectly. During the day, the reflection of sunlight on the wooden walls make the atmosphere cool room, Thus even at night, Lighting effect on the table lamp that illuminates the walls, make the atmosphere romantic. Wooden wall not only be an accent. He is also a changing atmosphere of good living. Maybe there among you who are interested?

1. Trellis design
So, how to design a house bars in order to meet the security function and beauty? Not difficult really, just watching the design, construction, and size of elements. Who does not miss is the measurement of the bars in order to function properly. Before the measure, it never hurts to plan the design before construction will be used. This course adapted to the existing window design, it’s okay to iron-iron grille designs tailored to the shutters, to avoid overlapping motives. These overlapping motifs will give the impression it was not crowded and beauty show.

Trellis design on glass shutter boxes are not as free as the leaves plain clear glass window without frames, The framework of the actual functioning shutters shutter in order to help the stronger, so do not worry if as if the framework is annoying shutter grille design.

Trellis design can be matched with shutters, if taken into consideration when designing fixed frames contained on the shutters. Thus, frames of the shutters can add value to the overall beauty. Following the trend was not hurt, but it must still consider its main function, namely security. For example, the bars are made sturdy enough in terms of construction, but the design of the motive causes cavities large enough to allow a thief broke in. This of course does not answer the main function of the presence of bars.

2. Measurement and Construction
The size of the bars should be fitted with the size of the window frame to be protected. Measurement error could be fatal, because the bars can’t be placed on the frame. And finally can’t be used. If there is doubt in the measurement, should ask the experts services or directly carried out by a maker bars. This is to anticipate at the time of measurement error. Trellis consists of several elements forming, the frame or frames, and the contents of the bars panel, which consists of bars that are designed with a specific motive to consider the security aspects and beauty.

The trellis frame functions as the main construction elements, because the reinforcing bars of the structure located on this one element. In addition, the frame also connects between the contents of the panel with window frame grille. Proper trellis construction can answer the main functions of the bars on the security of the residence. If incorrect trellis construction, the bars are also not strong enough so that the main function not be answered. Other efforts to meet the main requirements of the bars are the use of appropriate materials.

3. Frame of Iron square
Trellis made of iron with welding connection, either on the frame or on the content of trellis panel, Materials for the frame is not just any metal, but it would be better if the metal used is iron elbows. That is the contents of the grille panel are connected to one of its wings, while the other wing functions to connect the bars to the frame. Thus, the relationship between the grille and frame are on the inside of the room, not part of the frame. Iron bracket that is used can use the size 25 x 25 x 3. That is, the width of each wing 25 mm and thickness 3 mm.

Relationship between the two is using nails or bolts with bolts of sufficient length. Theft incident that is often experienced by people is due to the bars instead of nails or bolts with a fairly long, thus easily removable grille plus frame from outside the house. There is another custom which is often done, that does not use an iron frame square but plates of iron. The function of this plate except as liaison between the bars with the sill, as well as a frame of content trellis panels, in this type, the frame is not nailed or bolted on the inside of the room but quite nailed or bolted on the inside of the frame.

Another alternative is the use of iron that has a low thickness, so that the iron easily bent or even cut. Iron is more solid round with sectional compared with iron plate, especially if you consider the size of the iron used. Of course this is still noticed the beauty and harmony with the home stay; not be indiscriminate use of steel with a very large thickness, with a strong reason to. Keep in mind, the above precautions taken to protect the house from thieves using human labor and didn’t using aid drills or electric saw to open the bars.

More fatal is when using a metal plate that is not thick enough-about 1.5 mm, resulting in plate the frame. In addition untidy impression, these bars are also not strong enough. The contents of trellis panels can be made of wrought iron of the current trend, or can be used with a metal such as wrought-iron finish. Everything is fine. But when look back on its main function, the use of iron for lattice trellis panels should also be strong enough with fairly precise dimensions. Apparently, the bars are not as easy to plan envisaged. We can’t just believe in the merits of making the bars. Material manufacturers, construction, and measures need to be considered and taken into account, in order to answer the main functions of the security bars that are also beautiful.